Guy G Qky

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer
| map-marker Bellingham, Washington

Thermostat housing

I bought a speedmaster intake manifold SPM-1-14*-*** it fits my 5.2 l all except for the thermostat housing mine is too small you sent me a part number pce191.1025 this is a stock Dodge thermostat housing it will not fit on your manifold the holes in your manifold are too wide apart my stock thermostat housing is 3 in center to center bolt hole and manifold is three and a quarter senator senator bolt hole as far as I know no Dodge thermostat housing will fit
View full review
Cons:
  • Needs many modifications
  • Wrong thermostat bolt up

Preferred solution: Let the company propose a solution

Don G Sai

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer
| map-marker Avondale, Arizona

Parts might bolt on or up , doesn’t mean they’re going to work

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
Speedmaster - Parts might bolt on or up , doesn’t mean they’re going to work
Speedmaster - Parts might bolt on or up , doesn’t mean they’re going to work - Image 2
Speedmaster - Parts might bolt on or up , doesn’t mean they’re going to work - Image 3
Bought a flex plate for their rotation assembly, took it too well known No Prep King racer friend,Who ll remain anonymous, Even though he told me about this product, he balance the rotation assembly told me if I ever needed to change the harmonic balance or or the flex plate it had to be replaced with the same exact one.Well seeing how the flex plate wont work because it has no offset, what are you gonna do now? Dont realize until the whole motor together because thats the last thing you put on ,WTF thanks again speed disaster Only about $5000 worth of stuff that may not work at all!
View full review
Loss:
$3500
Pros:
  • Price

Preferred solution: Let the company propose a solution

User's recommendation: Buy lots of aspirin

Mark H Cru

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer

To let other hard working people know the truth about this company.

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
Original review Jan 12, 2022
I ordered an air cleaner PCE 104.1019 back in 2019 and was told when I bought it that replacement filters would be available. When I order a filter PCE 107.1007 for that unit it would not fit. They would not stand behind their product and said it was out of warranty. I guess they think people should replace the complete air cleaner. I know now why they don't have any good reviews.Speedmaster has proof of my purchasce.
View full review
Loss:
$64
Cons:
  • Poor customer service
  • No customer service

Preferred solution: Let the company propose a solution

User's recommendation: Do not buy from this company. They do not stand by their vision or mission statement.

Wayne R Wrj
map-marker Lufkin, Texas

I need a part that was Discontinued

Discontinued it is a adapter kit For a 5.4 triton engine to a 4.6 triton intake conversion Im needing this part in a bad way
View full review

Preferred solution: Adapter kit for a 4.6 intake to a 5.4 engine triton Ford

Kenneth N Bur
map-marker Alvarado, Texas

Junk parts

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
Pistons that where so far out and nowhere to remove enough material and be safe doing so. Their gapless rings jamb in the ring land when they overlap.
View full review
Loss:
$500
Cons:
  • Lack of tech support
  • Junk parts
  • Poor quality

Preferred solution: Full refund

User's recommendation: STAY AWAY FROM THESE JUNMK PARTS

Bill J Vhc

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer
| map-marker Schomberg, Ontario

Unsatisfied Customer

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
Speedmaster Kit 1-13*-***, 8 stack semi cross ram fuel injection kit for LS-1 engines. Kit was shipped to me with no list of parts in the box. No instructions on how to do the install. No information on what other parts would be needed outside of the kit. The valley cover sent with the kit will not work for the GEN III LS engine family. I contacted Speedmaster Customer and got no help. Said I wanted to return the kit and they said I could not because it was over 30 days. This company has the poorest customer Service I have ever seen in 40 years of dealing with parts companies.
View full review
Loss:
$3400
Pros:
  • Price
Cons:
  • No customer service and not being truthful
  • No instructions

Preferred solution: Deliver product or service ordered

User's recommendation: Don’t buy their junk, you’ll be sorry

1 comment
Bill J Vhc

In order to get the correct part for my engine, I had to purchase the entire kit less the wiring harness. This cost $2400 they said I could send the old kit back and get my money back.

Now I can’t get anyone in the company to answer the phone to tell me who to send the parts back to for the credit. Still have no instructions.

Anonymous

Need parts

I dont know what happened but I am very happy with your business I called you guys were great on the phone
View full review
Craig P Wpc
map-marker Round Lake, Illinois

Cylinder heads

I have purchasing questions of Speed master 190cc straight plug loaded heads..........................
View full review
John P Ota

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer
|

This person supports our platform.
Get a badge ›

Supporter

Very unprofessional behavior by Speedmaster I bought aluminum roller rockers for my big black holes and there was an adjusting screw missing from the kit they won't sell me single adjusting bolt they

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
Very unprofessional behavior by Speedmaster I bought aluminum roller rockers for my big black...
I purchased aluminum heads and the gold aluminum roller rockers for my big block olds I spent a lot of money with the company my roller rockers were missing an adjusting screw all I ask is that they sell me one they told me I have to buy a whole nother kit 200 bucks for an adjusting screw I thought they were respectable company but they lost my business
View full review
Pros:
  • Good quality parts at a reasonable price
Cons:
  • Terrible service horrible policy
  • Awful customer service

Preferred solution: Deliver product or service ordered

User's recommendation: Stay away from Speedmaster products here's a picture of the boat they want me to spend $200 for

ROBERT N Uuy

This review is written by an individual who has purchased the reviewed product/service and/or confirms being a paying customer of this company. Check our FAQ

Verified Buyer
|

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer

Wrong product. Not packaged properly or something.

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
Speedmaster - Wrong product. Not packaged properly or something.
Speedmaster - Wrong product. Not packaged properly or something. - Image 2
Speedmaster - Wrong product. Not packaged properly or something. - Image 3
Speedmaster - Wrong product. Not packaged properly or something. - Image 4
I bought a 164 tooth 28 oz flywheel (flexplate) for my 1965 Mustang with a 289 in it. It DOES NOT FIT. It is perfectly flat where a Ford Flywheel has a dish in it to off set the torque converter studs and nuts from hitting the transmission spacer plate. I called and was told yep that is the correct one. I tried to drill holes and make it work but just no way. I feel like it was packaged wrong
View full review
Loss:
$150
Pros:
  • Quick shipping
  • Good selection
  • Good promotions
Cons:
  • Lack of instructions
  • No customer service
  • Tech was not parts knowledgeable no car knowledge

Preferred solution: Let the company propose a solution

User's recommendation: Make your own decision. I have bought parts from these folks before and everything was great but they didn't want to help me at all on this

2 comments
Robert N Fpb

No response to this complaint from the company. Zero.

Guest
reply icon Replying to comment of Robert N Fpb

You sound surprised. You were lucky.

They burn people all day every day and sell parts they know are bad. You notice all the posts about unusable parts they discussed with the company (so they know) and are still for sale the next day?

View more comments (1)
Anonymous

Broken rocker arm

Speedmaster - Broken rocker arm
Was contacted but they said could not replace because I did not test my stock spring pressure. The heads are on the car. To pull the heads and take to NAPA to test the springs would cost more than the rockers are worth. The ad for the rockers did not state that had to be done for warranty. They said they would submit claim but thought they would not honor claim. Will rate after response to claim
View full review

Preferred solution: Replace broken rocker

User's recommendation: Not a good one

Anonymous
map-marker Omaha, Nebraska

Save others the headache

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
Terrible experience. This is company is a scam. Took me for a ride and scammed me for a couple hundred dollars.
View full review

User's recommendation: Absolutely not

1 comment
Guest

Bought 351W roller top end engine combo kit, valve covers were for small block Chevy, sent them back two weeks ago have not heard A word from speed master. Heads look good, intake will not let distributor fit in, will try to machine distributor down to fit.

RONALD E Eng

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer

Could not get through on phone to cancel an order

Original review May 27, 2021
I had ordered a part, just a few minutes later I realize I did not need it. I called to cancel. They were not open so I manager to find a number that took a message. and I told them to cancel order. In the morning I called when they were open to verify it was canceled. There answering service kept cutting me off. Then I get an email later saying they shipped order that I canceled !!
View full review
Pros:
  • Fair prices
Cons:
  • Can not get through to customer service

Preferred solution: Full refund

User's recommendation: see if customer service will answer before you order anything

Jeffrey M Tbp

Problems

they sent me the the wrong parts. I spent several hrs on hold on there non existant customer service line. sent several emails .never responded.now I have spent an additional $150 in return fees.And no refund. Buyer beware
View full review

Preferred solution: Full refund

Bruce B Imp

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer
| map-marker Two Rivers, Wisconsin

Installed one of your distributors in 440 dodge and no spark

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
Installed distributor kit and have no spark. Plus the distributor for 440 dodge motor and will not go into place without grinding on the head casting. No instructions in box
View full review
1 comment
Bruce B Imp

Would like teck support to help resolve the problem